Your Cart


How To Recharge IGET Moon Cover

How To Recharge IGET Moon: Revive It With 5 Easy Steps

Are you stucking in a headache over your dead IGET Moon vape, don’t want to throw it away, yet uncertain how to recharge IGET Moon?

Do you want to revive it in a few steps? Just 5 simple steps are listed below to help you realize charging your I GET Moon device quickly.

Notes: Charging disposable vapes is dangerous and not recommended, and the following can be used as a reference.

  1. Open the IGET Moon vape
  2. Take out the battery
  3. Turn on the power and connect DIY wires to the battery
  4. Wait 5 minutes for charging time
  5. Assemble the battery to the IGET Moon

Let’s dive into charging IGET Moon that’ll have you saying, ‘Why didn’t I know this sooner?’ It’s time to make you have a world of flavours waiting at your fingertips.


How To Recharge IGET Moon

This charging guide is derived from my personal and third-party experience, where I successfully charged 3 IGET Moon vapes and meticulously documented each step of the process.

I also delved into the charging experiences shared by fellow vapers on YouTube and Reddit.

Combining these insights, I compiled a summary of the overall experience, and from there, I crafted this concise 5-step guide for easy reference.

Charging disposable vapes is generally not recommended as it is a safety hazard. This guide is for reference only and at your own risk.

Prepared Tools To Recharge A IGET Moon

Prepared Tools To Recharge A IGET Moon

Here are four tools you need to have on hand ahead of time before charging your IGET Moon K5000:

  1. Dead I GET Moon
  2. DIY cable
  3. Power socket
  4. A flathead screwdriver

If you don’t have a DIY cable, please check the following steps to make one:

Step one: One cable prepared to be cut

Step two: Cut the charging cable with scissors carefully

Step three: Peel back the outer protective layer to reveal the wires. There may be four different coloured wires: blue (black), red, white and green.

How To Recharge An IGET Moon Safely?

How To Recharge An IGET Moon Safely

Once we have the above tools ready, we can begin our charging journey.

How to recharge iget moon k5000

The next will provide a detailed, step-by-step to charge a dead IGET Bar Moon tutorial.
Open the IGET Moon vape
Open The Moon Vape

We need to use a screwdriver tool to assist us in opening the vape.

You’ll need to insert a small one-piece screwdriver into the slit to the middle of the joint.

Wiggle the screwdriver from side to side along the silver piece and pry open the device’s half of the housing. This process requires a bit of force.

This process should be done carefully and safely. It is best to wear gloves to avoid getting hurt by the screwdriver, and also be aware that this process may produce some scratches on the surface of it.

If you want to know the detailed steps to open it, we recommend reading the article how to open a IGET Moon.

Take out the battery
Take Out The Battery

Now, you can take out the battery.

Use your hands to gently remove the battery and the cotton wick from the device as they are bound together.

Please remove the battery carefully. To ensure that the battery is fixed and secured, there may be some resistance the first time to remove it, so removing it may not be as smooth as it should be.

Turn on the power and connect DIY wires to the battery
Turn On The Power And Connect DIY Wires To The Battery

To begin charging your vape, ensure there is power by plugging the DIY cable into the plugboard and then turning on the power switch.

Then, look at the colours of the battery ends, which are black and red.

Next, pair the red cable of the DIY cable with the positive red end of the battery and the blue (or black) cable with the negative black end of the battery.

This contributes to a closed circuit that effectively charges the battery.

Wait 5 minutes for charging time
Wait 5 Minutes For Charging Time

When the battery is reconnected with the DIY wires and the bottom indicator light illuminates, charging has been successful.

You need to monitor the charging process for around 5 minutes. Over 5 minutes may lead to overheating.

Of course, once you find the battery is overheated, please stop the charging, even if the charging process is less than 5 minutes.

Assemble the battery to the IGET Moon
Assemble The Battery To The Moon Device

Now, we can secure the battery with tape, place it in the vape’s body, and gently press it, like a bean-to-bean fit, to close the device unit.

How To Recharge IGET Moon K5000 Reddit And Youtube?

Here are some of my excerpts from Reddit and YouTube about charging the Moon IGET Bar with valuable reviews:

How To Recharge IGET Moon Reddit And Youtube 1
How To Recharge IGET Moon Reddit And Youtube 2
How To Recharge IGET Moon Reddit And Youtube

If you still want to check out more reviews, check out Reddit and YouTube.

How To Know When The IGET Moon Is Dead?

How To Know When The IGET Moon Is Dead
LED Indicator Light blinks

The I GET Moon K5000 is equipped with an LED indicator that may keep blinking if the unit is low on power to indicate a low battery or low e-liquid level

Reduced steam production

One of the most obvious signs that it is running out of power is a noticeable decrease in vapour production.

When you inhale and notice that the amount of vapour is nowhere near what it used to be, it’s important to be aware that the power is running out.

Weakened throat hit

Without enough electricity to heat the coils, you may feel a diminished throat hit.

If you find that your usual vaping experience lacks its usual intensity, this may indicate that the device is running out of power.

Drawing Difficulties

As the power of the vapes decreases, you may feel very unsmooth when vaping with the I GET Moon K5000, or you may find that the airflow is tighter.

If you find yourself having to draw harder or the draw feels restricted, this is a clear indication that the device is running low on power.

This is because the device may need enough electricity to produce vapour.

How Long Does IGET Moon Take To Charge?

How Long Does IGET Moon Take To Charge

Based on my experience and the personal experience of online vapers, the most reasonable charging time should be controlled at about 5 minutes.

If it is too long, it will cause the battery to overheat, and the serious consequence of battery overheating is the explosion.

So, if you are charging your vape, make sure you control the charging time closely, monitor the battery’s heating condition, and stop charging as soon as you feel that the battery is getting hot.

How Many Times Can IGET Moon Be Recharged?

How Many Times Can IGET Moon Be Recharged

It takes around 1 hour to charge the IGET Moon 5000 Puffs under normal conditions fully.

To avoid the risk of explosion due to overheating, it is recommended that charging is done in stages, five minutes per charge, with a full charge taking one hour and requiring 12 charges.

If the battery gets hot, please wait for the battery to cool down for 2-3 minutes and wait for it to return to normal temperature before continuing to charge the battery.

It’s recommended to charge your vape once a day to ensure a smooth vaping experience.

By incorporating this method, you enhance the longevity of the battery while prioritizing safety considerations during the charging process.

How Long Does A Fully IGET Moon 5000 Puffs Vape Last?

How Long Does A Fully Moon Vape Last

The IGET Moon Bar is precision crafted, and according to its specifications, it boasts an impressive capacity of 5,000 puffs and a battery capacity of 1,750mAh, which lasts about 10-20 days per one.

However, the longevity of this device is closely tied to the nuances of one’s vaping habits.

For a heavy vaper who takes more than 500 puffs a day, the vape will only last for 10 days. However, for a light vaper, it can last up to almost a month.

It’s important to note that while this estimate serves as a general guide, actual consumption may fluctuate based on the e-liquid capacity and each individual’s vaping habits.

How Can You Make Your IGET Moon K5000 Last Longer?

How Can You Make Your Moon Vape Last Longer

Of course, to maximise the life of your Moon IGET and ensure a long-lasting and satisfying experience, delve into the strategies detailed below:

Avoid Chain Vaping: Give your device short breaks of 4-6 seconds between puffs to prevent overheating and ensure optimal performance.

Pacing Yourself: To maintain your device’s performance and prevent overheating, incorporate short 10-15 minute breaks. It promotes efficient cooling and supports overall optimal functionality.

Store Properly: Store the vape in a cool, dry place away from direct sunlight. Extreme temperatures can impact battery life and overall performance.

Include a cupboard or drawer inside your home where temperatures remain consistent.

Employing a protective case can provide an extra layer, safeguarding the vape from extreme temperature fluctuations.

Why Is My IGET Moon Not Charged?

Why Is My IGET Moon Not Charged
Wrong Connection

If you connect the power cord to the battery but cannot successfully charge the battery, the correct positive and negative terminals may not be connected.

Before connecting it, you can refer to the following table to make sure it’s connected correctly.

Wire Colours Instruduction
Extreme Temperatures

If you are in an overheated or extremely cold environment, then it can also cause charging to fail.

Generally, we have indoor temperatures of 10-35 degrees, and it is recommended that a temperature of 25 degrees is optimal for charging the vape.

Battery Aging

Before charging, be sure to check the battery condition.

Look for any abnormalities on the battery’s surface, including leaks, unusual odours, or discolouration. Any of these signs could indicate aging or damage.

Do not try to charge the battery again if it is found to be abnormal or aged. Charging will not help and will not make the device work.

In addition, charging a deteriorated battery may lead to safety hazards, including overheating or even explosion.

Considerations To Charge IGET Moon

Considerations To Charge IGET Moon
Dry and Clean Environment

It is important to ensure that all items, including hands, are dry and clean before charging. Charging with wet hands may result in a risk of electric shock.

Inspect the Device

Before connecting to the charger, inspect the device for any visible damage, including the battery and charging port. Do not proceed if you notice any issues.

Keep Out of Reach of Children

Store the device and charging accessories in a location inaccessible to children. This prevents accidental misuse and promotes overall safety.

Understand any Risks of Charging Disposable Vapes

An exploding vape battery is no simple matter. You could get injured and possibly damage your much-needed vape, so we recommend that you are fully prepared for this adventure.

If you are not satisfied with just learning about IGET Moon charging instructions, the IGET Moon K5000 review is definitely worth a look.


All in all, it only takes 5 steps to charge your dead Moon IGET. Please note that this guide is for informational purposes only and to satisfy the curiosity of some users.

Charging IGET Moon disposable vapes is always dangerous, and we do not recommend you do it by yourself. Adverse consequences and risks need to be borne by you.

The easiest and least complicated way to do this is to buy a new IGET Moon K5000 as a spare so that you can seamlessly connect your vaping and don’t have to spend time preparing your tools for charging.

FAQ: How To Charge IGET Moon

How do you charge an I GET Bar?
  1. Prepare tools (pliers, scissors, power socket, paper towel and a DIY charger)
  2. Open an IGET Bar
  3. Take out the battery and tank
  4. Connect the wire and turn on the socket
  5. 4 recharges, 1-2 minutes each
  6. Reassemble IGET Bar